Australian made and supportedFast, free delivery Australia-wideFive-year battery warranty

DIY Ford Ranger 12V dual battery setup

By Topo DC Power2 min read

A DIY Ford Ranger 12V dual battery setup can be one 11kg unit and one fused cable from the starter battery. The DC-DC charger, solar controller and 12V 100Ah LiFePO4 battery are all inside it.

Topo Centerfire CF100 12V dual battery system for the Ford Ranger

Short answer: fit a fused cable from the Ranger's starter battery to a blue Anderson plug where the unit will sit, and plug in a Centerfire CF100. The 40A DC-DC charger is inside the unit, so nothing else goes under the bonnet.

A ute with two jobs

A Ranger usually works Monday to Friday and goes away on the weekend. A dual battery setup has to suit both. Under-bonnet second batteries compete for engine-bay space, and tray-mounted systems take room the work week needs.

The CF100 is a complete 12V 100Ah dual battery system in 11kg, at 288 × 138 × 245 mm. It's compact enough to stay fitted through the week without getting in the way, and it comes out when you choose.

Where it sits in a Ranger

Anywhere the unit can be secured, kept dry and given room to ventilate. On a ute or a cab-chassis, that means under a canopy or tonneau cover, never exposed to the weather.

Send us the year and body style of your Ranger and we'll check the space with you before you buy. The unit is 288 × 138 × 245 mm on a 242 × 138 mm base.

Before you fit: three checks

  1. The cable run. Measure from the starter battery to where the unit will sit, following the chassis rail. That length sets the cable size.
  2. The alternator. Many late-model vehicles run a variable-voltage alternator. The DC-DC charger inside the CF100 handles that, which is why it's a charger and not an isolator. More in DC-DC charger or isolator.
  3. The mounting point. Choose a spot off the floor and out of the weather, where the unit can be strapped or bracketed down.

How the charge cable runs

The vehicle side is two cables from the starter battery: a positive with an inline fuse close to the battery, and a negative. They run along the chassis rail to a blue 50A Anderson plug at the unit.

The further back the unit sits, the longer the run, so cable size matters most there. The CF100's vehicle input draws up to 55A while charging, and undersized cable over a long run is what slows a DC-DC charger down. Tell us the run length and we'll give you the cable size and fuse. The full steps are in our guide to fitting a 12V dual battery system yourself.

Charging on the way

With the engine running and the starter battery above 12.8V, the CF100's built-in 40A DC-DC charger tops the unit up. From flat it takes around 2.5 hours of driving. When the engine stops, the charger switches off and the starter battery is left alone.

At camp, a 12V solar panel plugs into the red input and the built-in solar controller handles it. At home, the Topo 10A Mains Charger plugs into the yellow input. Solar and mains share a 25A combined maximum.

What it powers

Two grey 50A Anderson outputs (100A combined) and a grey 20A mini output. That covers the fridge, lights and charging for a weekend: at 20Ah a day, an efficient 12V fridge runs for around five days on 100Ah. The working for your own gear is in what size dual battery you need.

The same setup in other utes

The vehicle side is the same on any ute: a fused cable to a blue plug. See the Ranger page for the unit against the Ranger, or the Toyota HiLux, Isuzu D-Max, Mitsubishi Triton and Mazda BT-50. Every model we cover is on the vehicles page.

Questions

Where does a dual battery go in a Ranger?

Anywhere the unit can be secured, kept dry and ventilated. On a ute, keep it under a canopy or tonneau cover. Send us the year and body style and we'll confirm the space.

Do I need a DC-DC charger under the bonnet?

No. The 40A DC-DC charger is inside the CF100. The engine bay only needs a fused cable from the starter battery.

Will it flatten the Ranger's starter battery?

No. The unit only charges from the vehicle when the starter battery is above 12.8V and stops when it falls below.

Can I move it to my next ute?

Yes. The DC-DC charger moves with the unit. The next vehicle only needs the fused cable and blue plug fitted.

More guides